In my search for a GoDaddy alternative, I found that I really like NameCheap.com. They offer good rates on domain transfers and registration. I also like their control panel much better than GoDaddy. They don't have as much up-selling going on when you register a domain. I always found that annoying about GoDaddy. I also didn't care for GoDaddy's domain manager. Once, I tried out GoDaddy's Windows hosting as well. It was terrible. So if you are looking for a viable alternative to GoDaddy, you should definitely give NameCheap.com a try.

Best Godaddy Alternative Registrar is a post from: SupremeTechs

There is a good alternative for parents in their search, however. OpenDNS, which is a free DNS service with many features, has built in site blocking capabilities. You simple sign up for an OpenDNS account at http://opendns.com and configure your router to use the OpenDNS servers. That last part isn't as hard as it sounds, but it's different on various routers. Typically the DNS settings are in the main router configuration settings. It will typically be set to automatically use the DNS servers provided by your ISP. You should be able to use manual DNS servers, however, and you can find the IPs for these servers at the bottom of your OpenDNS account page.

Once you have your router using OpenDNS's servers, you can configure your home network's settings on the OpenDNS accounts page. There are various levels of blocking, plus you can block individual domains if you want. They also have good stats available, if you enable it. This will track all domain name requests and show you what everyone on your home network has been looking at. I'd say a few wives just raised their eyebrows.

Of course, with enough know how, one can get around these types of blocks, just like any other block. Most children will not know how to do this, however. Tech savvy teenagers may have more ability to get around these blocks, but once they are at the point where they'll go to such great lengths to look at porn, just let them do it. They aren't going to listen to you anyway

A Free “Net Nanny” Solution using OpenDNS is a post from: SupremeTechs

Suffice to say that the web sites were loading very slowly. So, I switched the NS back to the VPS server I've been running them on. I've seen its load spike to 10 quite often but it normally stays well below 4. So the VPS is holding up pretty well considering. This VPS has 4 cores assigned to it, each at 1.6 GHz. It also only has 3GB of RAM. So, my question is, "Is a dedicated server really the best option?".

There's more factors in this as well. For instance, my sites are all on a WHM/cPanel install, which means I have to pay a monthly license fee for that as well. On a VPS this license is about half the cost as it is on a dedicated server. I like saving money.

I currently have my hosting through a small hosting provided in Knoxville, TN called Knoxcolo/Smith & Hammaker. I have a colo server (not the one I used for my 600 sites, it's a single site), and I have the VPS. For the colo they charge $35 for the 1U of rack space, and it's an unmetered drop. The VPS is $40 per 1GB of RAM. That's their rate, they don't charge for extra HDD space or even CPU cores. They are also a good bunch of people to work with. I have full access to the colo facility through a high security system. I rarely use it since my colo has an iLo connection for remote console even when the servers main drop is offline.

I thought that a dedicated server would be a better choice for my 600 sites, but I've found that the VPS is really the better choice in the long run. The only thing I don't like about the VPS is that I don't have the ability to remotely reboot the virtual machine. I'd really like this ability.

So I've found that perhaps a dedicated server isn't what I really want. Some VPS providers give you a lot more bang for your buck. You can spend hundreds of dollars per month on a very powerful dedicated server, but you have two problems. You don't want to spend a lot of money for hardware that you may not use fully. Of course, secondly, you don't want to spend a lot of money on a server that can't fully handle the load if you have a lot of sites. With a VPS, you have more power to change the hardware specs to meet the demand of your site load. You pay for whatever you need. This is really the best option for anyone who wants to host any number of sites. If you don't need much power, because you only have a few sites, you can save money.

However, you should look for the best deal on a VPS. Smaller companies actually have the better deal when it comes to a VPS, because they typically don't have as much total load on their rack of CPUs. If you get a VPS from a larger provider, they may be pushing their rack to its limits already, and you'll get terrible physical processor speeds, even if you are paying for four cores.

Shop around and look into VPS servers. They are great alternatives to dedicated or colo servers if you look in the right place.

My Search for the Best Deal on a Dedicated Server is a post from: SupremeTechs

Removing Old eth devices from Debian is a post from: SupremeTechs

First, when you add the folders to Serviio make sure to add them via the "network". In other words, if you have the shares mounted as mapped drives, don't use the mapped drive letters. I experienced some issues when doing it that way.  Secondly, you'll want to configure the service to run under your user account. Here's the step-by-step:

First open control panel and open Administrative Tools:

Next double-click "Services":

Find the Serviio Service:

Right click on it and choose "Properties":

Click on the "Log On" tab and set the credentials for the user which has access to the Windows Share:

Hit OK and stop/start the service by right clicking on it and choosing "Stop". After it stops, right click again and choose "Start".

You should now be able to access the files from your media device (PS3, Xbox360, and other).

Adding shares to your Serviio library is a post from: SupremeTechs

I searched for a bit and found that about the best deal in town is namecheap.com. There is a transfer fee for moving domains over to them, but you get a free year of registration with the transfer. So for around $7 bucks you can transfer and renew a .com. If you have a few months left before it's time to renew your .com, you can still transfer the domain and get a free year along with the remaining time of your current registration.

Check out their deals. Let's show GoDaddy that we do not like their support of this unconstitutional legislation.

NameCheap.com

GoDaddy Alternatives | Boycott GoDaddy is a post from: SupremeTechs

First of all, your home router controls all of the traffic going to an from your home computers. Some people don't have routers. The modem, whether it be a DSL, Cable, or dialup modem, handles their routing. These instructions will work for those people as well, but anytime I mention the router, please understand that if there is no router, the modem will be doing all the work.

The router software for various models of routers are different, so it is nearly impossible to have a step-by-step howto for each of them here. Instead, it's suffice to say that most routers have a block/unblock function. Most even let you time these blocks/unblocks. So one can set up rules as to when certain sites can be viewed.

Refer to your router's manual for these instructions. It is usually rather easy.

There is a further step that can either be used in conjunction with the router blocks or by itself entirely. This method involves signing up for a free service call OpenDNS.

OpenDNS is a free service that I've used for a little over a year. It gives you a great DNS service, plus allows you to do various other interesting things like protect your home network. Basically, all one has to do is sign up for the account and change their DNS settings in the router to the IPs provided by OpenDNS. All future DNS request will go to OpenDNS.

I should probably first explain what DNS is to begin with. DNS stands for Domain Name Server/Service. When you type google.com into your web browser, your computer has no idea what google.com is. It's oblivious. First it has to query the DNS server. Usually the IP of the DNS server is provided by your ISP. In many cases, the ISP provided DNS server lags behind a bit. You computer asks the DNS server where it can find google.com. The DNS server then responds with the IP address for google.com. Your browser then knows where to fetch the information.

The DNS server configuration can be changed in your router. You will override the ISP defaults and put in the OpenDNS server IPs instead.

OpenDNS updates much faster than typical ISP DNS servers. When you buy a domain name and direct it to your hosting provider, it can take up to 72 hours for the DNS information to propagate across the internet. OpenDNS usually propagates within minutes.

Some of the protection OpenDNS offers is right up there or better than many parental block software. There are automatic settings to make it easy to block pornography or harmful sites. One can also specify sites to block. Anytime a local user tries to access a blocked website, they are told that it is restricted. This is great free service, and I hope this will help you block those unwanted websites, and if you have any questions drop a comment.

How do I Block and Unblock Internet Sites? is a post from: SupremeTechs

I saw a video explanation of this behavior that stated that Google was a beach, and while I enjoyed the analogy, it isn't entirely correct. There is a lot happening on the internet, but there's no way Google can index it all at once, or even catch it all. That's why they have many data centers, each pulling their own part of the weight. I'd imagine that the synchronization of the data takes time, that is if they actually synchronize the data at all. It may be that Google does this to randomize search results a bit in order to gauge relevancy of each result. At any rate, the keyword results can vary.

Also, after making this video, I captured the packets using wireshark and found that the request from my home internet connection was querying IP 208.67.217.231 and my proxy server is pulling the query from 74.125.159.103. Also neither of the search results were correct. After digging into the other pages of results there is a total of 64 results omitting the repeats. ICHY reports that the keyword has 3,640 competition. So, from what I can see of the data on both sides, ICHY doesn't report very accurate competition numbers according to their own explanation of the relevant results. Other keywords in their list yielded similar results discrepancies.

Why do Google Search Results Change? is a post from: SupremeTechs

I found the solution to this after reading through many, many forum posts. I saw others were having the same problem as me and were getting responses from people like "reboot the router" or "reset your network settings on the iPhone." This is all well and good and I'm sure those people meant well but there was a big problem with their responses.

First of all, everyone having this trouble said that the wireless worked fine on their computers but not on the iPhone. Secondly, there aren't many settings to "reset" inside the iPhone's network settings. There's just not anything in there that would cause this type of issue.

The solution to the problem ended up being an advanced setting on the router itself. From what I can tell of the issue and it's solution, the iPhone's wifi is just a bit more picky than a standard PC wifi device. Here are the settings I eventually had to change on my Netgear router.

The important items here are the fragmentation threshold and the CTS/RTS threshold. Each of these were set to their max value previously. After changing these two settings, my iPhone started working like a champ.

If you are experiencing the same problems with your iPhone or iPod Touch's wifi, change these settings on your router. Also note, these settings have slightly different names on some routers. Refer to your router's manual for more info.

Edit: I've gone much lower with these number with much success for my less powerful mobile devices. Going too low does seem to cause issues with more powerful computers on the wireless network. Test this out with lower settings and post your success or failures in the comments.

Apple Mac Mini Desktop March 2009 Customized

16 Bids

US $405.00

13m

Seller Refurbished New Apple Mac mini Computer 110W Power Adapter ChargerCord

1 Bid

US $24.99

15m

MINI DISPLAYPORT TO DVI DISPLAY PORT FOR APPLE MAC PRO

US $8.03

40m

6FT HDMI CableMini Display Port Adapter For Apple Mac

US $10.19

1h 5m

RARE 4GB MINI USB 20 PORTABLE Pocket 1 SLIM EXTERNAL HARD DRIVE for PC or MAC

US $8.95

1h 9m

Powered by phpBay Pro

Slow wifi on iPhone 3GS is a post from: SupremeTechs